AS07B42

AS07B42
 
HomePortalCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 If the Backlight Of The LCD Monitor Has Failed.

Go down 
AuthorMessage
Admin
Admin


Posts : 319
Join date : 2011-09-04

PostSubject: If the Backlight Of The LCD Monitor Has Failed.   Fri Oct 21, 2011 2:52 pm

Identify the battery-release latch and press down about it with one hand, and then pull the battery out from the case, setting the laptop or pc battery aside.
The convenience supplied by the portability of a laptop or pc can
become a hindrance as a result of screen malfunctions? it is simply not easy to
connect a new monitor that you can with a desktop method. If the backlight
with the LCD screen has was unable, you can see whatever image. To fix this
problem, the entire inverter board and its particular connected LCD cable require
to be manually exchanged. Here below are the instruction for one's
reference.
1. Check inside the manual of your laptop or pc or search the infomation as a result of
the Internet to support the element of the manufacturer抯 websites. Merely
get that what device fo inverter board you will need for your computer, acquire
my Pavilion DV2000 Display screen as instance, I obtain a right one from a respectable site, HooToo. com, and i fix it without any help.
2. Turn off your laptop抯 operation system. Power down the LCD screen
cover. CTurn the whole laptop over and so the bottom end of the way it is is facing
up in the direction of you. Locate the battery-release latch and press down about it
with one hand, and then pull the battery out from the case, setting the laptop or pc battery aside.
3. Locate the rubber pieces around the edges and the surface of the LCD. Pop the
stopper pieces from the case by inserting a set object underneath
them and pulling out toward you will. Use a screwdriver to take out the
screws hidden beneath the stoppers.
4. Put the mobile computer back over and opened the LCD screen backup.
Slide a flat along with thin object, such to provide a screwdriver, directly
underneath the seam with the plastic bezel underneath that LCD screen.
Wiggle the screwdriver along gently until the bezel pops away from the
case. Lift the bezel up and determine if there is a good cable running to
the particular motherboard. Disconnect the cable if you have one.
5. Pull the truth on the screen closer, and then remove it all from
the laptop. Locate the inverter board at the end of the screen together with
find the cable running from your inverter board to typically the motherboard. Pull
off the strip of tape around the board and remove that screws holding it inside
place if there are any on your own particular model of laptop or pc. Disconnect
the cable from your motherboard.
6. Connect the particular motherboard cable for plastic-type material bezel and place that bezel
back onto that laptop case. Finally, just put the battery in to the laptop
and power the application on, and then after the manufacturer抯 logo appear in the
screen, it mean that you will be successfull to install the fresh new inverter
board and lead rightly.

Article Tags:
Inverter Table
Back to top Go down
View user profile http://as07b42.forumotion.com
 
If the Backlight Of The LCD Monitor Has Failed.
Back to top 
Page 1 of 1
 Similar topics
-
» Met Police to monitor Mobile Phones
» Wearable Health Monitor Sticks to Your Skin
» Arcade monitor needed big buck hunter
» Minister: Tracey Fay was failed by the State
» Brightest pupils failed by state schools chief inspector warns.

Permissions in this forum:You cannot reply to topics in this forum
AS07B42 :: Your first category :: Your first forum-
Jump to: