When the Backlight Of The LCD Computer screen Has Failed_2.

Uncover the battery-release latch and press down on it with one hand, and then pull the battery out of the case, setting the laptop battery aside.
The convenience provided by the portability of a laptop computer can
become a hindrance due to the screen malfunctions? it is not easy to
connect a new monitor as you can with a desktop strategy. If the backlight
of the LCD screen has was unable, you can see any image. To fix this
problem, the entire inverter board and also its particular connected LCD cable will need
to be manually supplanted. Here below are the instruction for your
reference.
1. Check while in the manual of your pc or search the infomation because of
the Internet to support the section of the manufacturer抯 websites. Just
get that what model fo inverter board you need for your computer, take
my Pavilion DV2000 Computer screen as instance, I purchase a right one from a reputable site, HooToo. com, and then i fix it by myself.
2. Turn off a laptop抯 operation system. Shut down the LCD screen
lid. CTurn the whole laptop over therefore, the bottom end of the way it is is facing
up for you. Locate the battery-release latch and press down on it
with one hand, and then pull the battery out of the case, setting the laptop battery aside.
3. Locate the rubber pieces to the edges and top of the LCD. Pop the
stopper pieces off of the case by inserting an appartment object underneath
them and then pulling out toward you. Use a screwdriver to retrieve the
screws hidden underneath the stoppers.
4. Put the laptop computer back over and amenable the LCD screen save.
Slide a flat plus thin object, such as a screwdriver, directly
underneath the seam of your plastic bezel underneath a LCD screen.
Wiggle the screwdriver up and down gently until the bezel pops off the
case. Lift the bezel up and check to see if there is your cable running to
the motherboard. Disconnect the cable if there is one.
5. Pull the case on the screen towards you, and then remove the idea from
the laptop. Locate the inverter board at the bottom of the screen along with
find the cable running with the inverter board to the actual motherboard. Pull
off the strip of tape to the board and remove typically the screws holding it through
place if there are any against your particular model of netbook. Disconnect
the cable from the motherboard.
6. Connect a motherboard cable for vinyl bezel and place a bezel
back onto the laptop case. Finally, just put the battery into the laptop
and power it on, and then should the manufacturer抯 logo appear on the
screen, it mean that you are successfull to install the new inverter
board and cable rightly.

Article Tags:
Inverter Board